Car Stereo Wiring 101 - A Must Read!

!±8± Car Stereo Wiring 101 - A Must Read!

I have come across a lot of car stereo systems over the past 10 years or so. There are so many "techniques" to installing head units. Everyone has their own opinion of what is right and wrong when wiring up a system, but just because it works doesn't make it right.

I asked Majestic Modifications what their opinion was on the subject. How do they install so many units and always get it right?

First, if applicable, always use the harnesses. The aftermarket wiring harness will usually take the guesswork out of the installation. These harnesses attach to the vehicle's factory wiring harness and gives you a color coded installation. You just attach red to red, yellow to yellow, etc. But is that all an installer should know?

Starting with your digital multimeter, find the power sources in the harness. One source will be continuous 12 volts, the other will be the ACC (ignition) 12 volts. These two will go with the yellow and red wires from the aftermarket head unit's harness. They are labeled accordingly. It is usually a good idea to attach the ground wire to the frame of the dash. A lot of head units come with a connector for this already attached to the ground wire. Secure these in place with some solder and shrink tubing. Slip the shrink tubing over one of the wires to be connected and move it out of the way. Connect the wires and dab a little solder on the wires. Let cool and then slide the heat shrink tubing over the connection. Heat with a heat gun/hair dryer to shrink the tubing to fit.

You can try to look on the internet for the wiring colors, but good luck. They will tell you the "typical" wire colors, but chances are it will be different. You can try two techniques to find the right wires. Clip the rest of the wires from the factory harness. You can test the speakers with a good 9 volt battery to see which speakers are which. Two wires connected to the same speaker will make it pop. Note which speaker makes the pop and attach it to that speakers wiring from the head unit. I like to turn the unit on and make sure the wires are the right polarity. A reverse wired speaker will not have as good a sound as a properly wired one. Continue the technique until all the speakers are connected.

The other way you can trace the speakers down is to turn on the head unit, but be VERY careful to not cross any wires. Start with a pair of wires, and attach them one at a time until you get sound. Note which speaker it is and attach it to that speaker's wires from the wiring harness, taking not of polarity. Continue until all the wires are in place. Zip tie the wire together and neatly tuck them behind the head unit.

Be sure you have a good ground wire connection. Be sure that RCAs or signal wires are running away from any power wires or sources, and are not run parallel to them.

If you want a neat trick, you can attach the 12 volt acc to the illumination wire, and you will be able to turn the unit on with your parking light switch. Take note, that anytime the unit is on, the dash panel lights will be on too, but you won't notice them in the daytime. The illumination wire is used to turn the factory radio lights on at night.

Not having the wiring harness for your vehicle is not a do or die situation. If you can get the harnesses, save the hassle and time and use it. If you find yourself in a bind, then follow the steps above and get it installed correctly.

Car Stereo Wiring 101 - A Must Read!

Purchasing Thule Load Bars

Hair Loss Treatment Shampoo - Miracle Cream?

!±8± Hair Loss Treatment Shampoo - Miracle Cream?

There is no easier way in the world to add a daily regime into your life than if you are simply adjusting something you already do on a daily basis. Exercising may be difficult if you aren't already active, but if you already walk to work, taking the stairs to your office, rather than the elevator, is just simply a step up from where you already were. The same applies to adding hair loss treatment shampoo into your daily routine. Rather than reaching for your typical brand, simply apply the medicated shampoo instead and massage hair restoration potential deep into your scalp.

Hair loss treatment shampoos hold real promise for people who are suffering from thinning hair. These products allow deep cleansers to be added to scalps that are damaged from chemical use, nutritional deficiencies, hormonal abnormalities, and other harmful elements. Equilibrium is lost when hair becomes thin and damaged, and scalps become callous and unproductive. Proteins and minerals are raked away easily and overall hair health is diminished. This bruised follicle system is then desperately in need of repair. By utilizing these scalp products regularly in the shower, you can revitalize your nutrient-deficient hair and scalp, and build a foundation for beautiful, thick, healthy hair to prosper. Stimulate growth by providing a nourishing environment.

Many hair loss treatment shampoos work in a series. This means that there are levels of cleansing and nutritional benefits that increase as needed. Initial treatments will undoubtedly be more intense with their cleansing effort due to the amount of build-up and damage. These conditions are always higher in the beginning of treatment. Several products, thus, need to be collected as your cleansing efforts increase to produce an optimal effect. Amp up your natural defenses and combat challenged, thinning hair.

By applying essential amino acids and minerals and hydrating your scalp and existing hair, you are combating thinning hair and triggering new hair growth. This is essentially the same concept as providing a dying garden with fertilizer. Water kept the plants alive, but the sun has scored the leaves and the earth. Internally and externally, this garden is ailing, and soon, dry, cracked earth and scorched leaves will remain. Fight this lackluster display and begin using hair loss treatment shampoos at the first sight of unwholesome hair.

Commonly, hair loss is due to hair abuse. Styling products with harsh alcohols, shampooing products, blow dryers, and irons strip the very essential elements of hair and cause it to fray, thin, and inevitably snap and fall to the floor. In order to best suit the needs of your hair, you must understand the needs of your hair.

Once you have categorized your hair type, begin researching the products available. Many companies are promoting their products for cosmetic use, rather than for dealing with the arduous task of achieving FDA approval. This approval can take years, but don't let that separate you from encountering great products right away! Before you begin purchasing, however, make sure that you are aware of any allergies to active or inactive ingredients you may have, so that you do not further aggravate your hair condition. Sulfa or sulfur allergies are common, so make sure you check with your doctor to see if you are susceptible to a reaction. An allergic reaction can cause hives and itching, which will lead to scratching and further damage. The goal of any hair loss treatment shampoo is to increase health and growth, not the other way around.

Hair loss treatment shampoos are an excellent resource if you are in the beginning stages of fighting thinning and challenged hair. When hair begins to lose its endurance and thickness, hair transplants are not always the only remedy. Healthy hair is born from a healthy scalp. The only things separating you from a head of luxurious hair are the nutrients that feed and promote its growth. By topically nourishing this damaged follicle environment, you can reverse the effects of time and begin to help your hair grow. You can combat thinning hair by finding the right shampoo for your hair restoration needs and applying it today.

Hair Loss Treatment Shampoo - Miracle Cream?

!8!# Ice Dams On A Roof Buy Online